模擬浸泡試驗是一種廣泛應用的水溶液掛片試驗，方法簡單。按照金屬材料制成試樣，在實驗室配制的溶液中或在取自現場的介質中浸泡一定時間，用選定的測定方法進行評定，常用表觀檢查、質量法和點蝕測量方法進行評定。根據試樣與溶液相對關系的不同，可分為全浸、半浸和間浸三種類型試驗。

模擬浸泡相關技術標準
 

標準名稱：Standard Practice for Laboratory Immersion Corrosion Testing of Metals
標準編號：ASTM G31-72（1999）
標準概述：This practice describes accepted procedures for and factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include specimen preparation, apparatus, test conditions, methods of cleaning specimens, evaluation of results, and calculation and reporting of corrosion rates. This practice also emphasizes the importance of recording all pertinent data and provides a checklist for reporting test data. Other ASTM procedures for laboratory corrosion tests are tabulated in the Appendix.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

標準名稱：金屬材料實驗室均勻腐蝕全浸試驗方法
標準編號：GB10124-88
發布日期：1988-12-01
實施日期：1990-01-01
標準概述：本標準規定了金屬材料實驗室均勻腐蝕全浸試驗方法的適用范圍、引用標準、試樣、試驗裝置、試驗溶液、試驗時間、試驗條件和步驟、試驗結果和試驗報告。本標準適用于評價金靄材料全浸試驗的均勻腐蝕性能。